facebook-pixle

Adelaide's Biggest and Best Car Trailer Range

Adelaide Trailer Sales

If you’re looking to buy a car trailer in Adelaide, we have you covered. At our workshop in Pooraka, we design and manufacture an extensive range of car trailers to suit all your vehicle transporting needs — and your budget.

When you buy a trailer in Adelaide from Basic Trailers, you are guaranteed of getting a high quality, locally-built trailer manufactured from 100% Australian steel. In addition, we offer a range of trailer upgrades that enable you to customise a car trailer to better meet your precise requirements, including tri-axle models with ATM up to 4,500 kg, electric brakes and rocker roller suspension.

Car Trailers

Our car trailers are fitted with two ramps that can be easily attached to the rear of the trailer and then stowed safely and securely in the trailer floor, ensuring a fully flat towing surface. You have the option to add a heavy duty winch that enables broken down or unpowered vehicles to be loaded more easily.

Car trailer dimensions
  • 14 x 6.4
  • 16 x 6.4

Beavertail Car Trailers

The rear section of a beavertail car trailer slopes down so that it is lower than the front, making it ideal for loading cars, plant and other machinery with lower ground clearance. Ramps slide out and are easily attached at the rear of the trailer; they can then be detached and stowed easily and safely within the body of the trailer. An electric winch can be added to make it easier to load broken down or vehicles without power.

Our beavertail car trailers are available in a variety of configurations, including flat top and full floor models.

Beavertail car trailer dimensions
  • 14 x 6.4
  • 14 x 6.4 full floor
  • 14 x 8 flat top
  • 16 x 6.4
  • 16 x 6.4 full floor
  • 16 x 8 flat top
  • 18 x 8 flat top
  • 20 x 8 flat top
  • 22 x 8 flat top
  • 24 x 8 flat top

Full Floor Car Trailer

Basic Trailers full floor car trailers feature a tie rail at the front to ensure secure transportation of all types of vehicles. Ramps are stowed within the body of the trailer, and can be easily slid out and then attached to the rear. In addition, an electric winch can be added in order to make it easier to load vehicles that are unable to run.

Our Adelaide-built flat floor car trailers can be configured with an entirely flat floor or with a beavertail, in order to make it easier to load cars and other vehicles with lower ground clearance.

Full floor car trailer dimensions
  • 14 x 6.4
  • 14 x 6.4 beavertail
  • 16 x 6.4
  • 16 x 6.4 beavertail

Flat Top Car Trailer

Our flat top car trailers feature a beaver tail, as well as side and front tie rails fitted below rather than above the deck, so that they have a completely flat surface. This makes this an extremely versatile category of trailer which can carry a wide range of load types beyond cars, plant and other vehicles (there is the option to add flush floor tie points, if required). The rear ramps are stored within the body of the trailer and can be easily slid out, attached and then stowed again. You have the option of adding a heavy duty or electric winch for loading broken down vehicles.

Flat top car trailer dimensions

  • 14 x 8 beavertail
  • 16 x 8 beavertail
  • 18 x 8 beavertail
  • 20 x 8 beavertail
  • 22 x 8 beavertail
  • 24 x 8 beavertail

Hydraulic Tilt Car Trailers

Basic Trailers hydraulic tilt car trailers make it easy to transport cars, plant and heavy machinery. They feature a 3 x 1.5 27” 6000 kg rated double acting hydraulic cylinder powered by a 12v hydraulic power unit and supercharge D50Z 80ah deep cycle battery, so there is no winding, or physical raising or lowering of the trailer required. Ramps are not needed, and once a vehicle has been loaded, it can be firmly locked in place.

Our range of car tilt trailers can be upgraded to 2,800kg, 3,200 kg, 3,500 kg or 4,500 kg ATM and are available in both tandem and tri-axle versions.

Hydraulic tilt car trailer dimensions
  • 16 x 6.4
  • 18 x 6.4
  • 20 x 6.4

Custom designed car trailers

We manufacture an extensive range of car trailers, but if none of our current models suit your needs, we also design and build custom car trailers. If you have very specific needs, please don’t hesitate to get in touch with us and we will be happy to discuss designing a custom trailer just for you.

Get in touch for Adelaide car trailers

If you want to find out more about our current range of beavertail, flat top and tipping car trailers, or discuss having a custom trailer built to your specifications, please feel free to call Sam on 1300 770 770. You are also welcome to visit our workshop in Pooraka and see our Adelaide car trailers being built.

3.8k Shares
Facebook Share
Twitter Tweet
Pinterest Pin
LinkedIn Share
Tumblr Share
Reddit Share
Left Arrow
Right Arrow
TRAILER RANGE